Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Belmont High Dining Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Thailand - r05 Page 1 of 4

Thank you for purchasing the Belmont High Dining

Table. This page lists all the contents included in the

box. Please take time to identify the hardware as well

as the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

Note: 2 people are required to safely assemble this product.

BELMONT HIGH DINING TABLE

Missing hardware?

Please call 800.606.6387 for replacements.

8 - cam

screws

1 - tabletop

1 - bottom shelf 2 - door fronts

(1 left, 1 right)

1 - middle shelf

16 - bolts

allen wrench (included)

1 Insert 4 cam screws into left and right side panels as

shown. Secure, but do not over tighten, each cam screw

using a phillips head screwdriver.

2 - side panels

(1 left, 1 right)

NOTE: Do not over

tighten the cam screws

8 - cams

1 - top shelf

left and right

side panels

phillips head screwdriver

( We recommend the use hand tools instead of power tools )

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (4 pages)

PAGE 1
BELMONT HIGH DINING TABLE HARDWARE 8 - cams 16 - bolts 8 - cam screws Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Belmont High Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BELMONT HIGH DINING TABLE NOTE: Make sure each cam points toward the nearest edge with holes NOTE: Do not over tighten the bolts bottom shelf top shelf left side panel tabletop 2 A) Insert 4 cams into top shelf as shown. Make sure arrows on each cam points toward the nearest edge with holes. B) With the assistance of another adult, place tabletop onto a clean, padded surface and insert 4 cams into each apron of tabletop as shown.
PAGE 3
BELMONT HIGH DINING TABLE right side panel B NOTE: Do not hold assembled unit at top shelf B A tabletop 6 With the assistance of another adult, place tabletop onto a clean, padded surface. Holding assembled unit from bottom shelf and left side panel, place assembled unit onto tabletop as shown. Fit cam screws of assembled unit into corresponding holes of tabletop. Secure all cams. B 7 A) Fit cam screws of right side panel into corresponding holes of assembled unit shown. Secure all cams.
PAGE 4
BELMONT HIGH DINING TABLE DROP-LEAF EXTENSION 90º NOTE: Make sure each leaf is securely supported by bars on underside of tabletop Locate extension leaves on each side of table assembly. Carefully lift 1 extension leaf 90º as shown. NOTE: Make sure to grab the leaf near the bottom with both hands. Hold extension leaf near the edges with both hands. Reach under and push slide bars in. Gently lower extension leaf down. Repeat steps for remaining extension leaf. Leaf extension is now complete.