Assembly Instruction

Made in Thailand - r09 Page 2 of 2
BELMONT 42” WALL SHELF
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
WALL
OPTIONAL MOUNTING INSTRUCTIONS
The wall mounting hardware included with this shelf
is intended for drywall installation only. Be sure to
use hardware appropriate for your wall type.
Whenever possible, fasten screws directly into wall
stud. If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
A) Determine the final location of unit. Mark positions
of holes of mounting brackets (pre-installed) on wall.
B) Drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller
in diameter than the anchor. Gently tap 1 plastic
anchor at each marked hole location, tightening
with a phillips head screwdriver until the head of
each anchor is flush to the wall surface.
C) Attach the mounting brackets to the wall by
inserting 1 medium screw through each mounting
bracket and into the wall anchor or stud in the wall as
shown. Please note the top of the mounting bracket
will be visible above the top of the shelf.
Installation is now complete.
B
C
medium
screw
mounting
bracket
(pre-installed)
plastic
anchor
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture
wax or polish on the shelf base as the base is
finished with a protective clear lacquer.