Manualshelf

Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Belmont 42" Wall Shelf
12
Made in Thailand - r09 Page 1 of 2
Thank you for purchasing the Belmont 42” Wall Shelf.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
BELMONT 42” WALL SHELF
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
ASSEMBLY HARDWARE
TOOLS REQUIRED
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
4 - large
screws
4 - plastic
anchors
INSTALLATION INSTRUCTIONS
The wall mounting hardware included with this shelf is intended for
drywall installation only. Be sure to use hardware appropriate for
your wall type. Fasten at least one screw directly into wall stud. If you
are unsure about your wall type or what mounting method you should
use, consult a qualified professional or your local hardware store.
A) Determine the wall location and place the wall bracket into
position. Make sure the pointed side of the bracket points up. There
are 17 holes in the bracket. Choose 4 of these holes for anchoring
into the wall, aligning at least 1 hole with a wall stud. Level and mark
the 4 hole locations on the wall.
B) If attaching directly into wall studs, skip to step D.
C) For drywall installation, drill a hole in the wall stud. If the wall stud is
not available, drill a hole in the wall that is slightly smaller in diameter than
the anchor. Gently tap 1 plastic anchor at each marked hole location,
tightening with a phillips head screwdriver until the head of each
anchor is flush to the wall surface.
D) Insert 1 screw through each hole in the wall bracket and
into the corresponding anchors or studs in the wall. Fully
tighten each screw with a phillps head screwdriver but do not
over tighten
E) With the assistance of another adult, fit the angled bracket on the
back of the unit onto the wall bracket. Make sure the unit is firmly
seated in the wall bracket.
Installation is now complete.
OPTIONAL MOUNTING HARDWARE
COMPONENTS
Missing hardware?
Please call 800.606.6387
for replacements.
1 - wall bracket 1 - wall shelf
assembly
C
D
WALL
E
WALLSIDE VIEW
wall shelf
wall brackets
wall
bracket
2 - plastic
anchors
2 - medium
screws

Summary of content (2 pages)