Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
5 Remove the adhesive backer from 4 rubber bumpers and
place over each exposed bolt head in the top frame. Fit
glass top into position. Assembly is now complete.
BARCELONA SIDE TABLE
Page 2 of 2
Made in China
2 Fit shelf into position, aligning holes in shelf corners
with holes on legs. Secure with 1 allen head bolt per leg
and fully tighten each with allen wrench.
3 Insert 1 leveller into threaded hole on the bottom of
each leg.
4 With the assistance of another adult, place table
assembly in an upright position. Fully tighten all 4 allen
head bolts in top frame with the allen wrench.
x 4
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.