Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
BARCELONA 4-SHELF ETAGERE
Page 2 of 2
Made in China - r05
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners.
3 A. Insert 8 short allen bolts into the holes in the
underside of the top and bottom shelves.
B. Fully tighten 8 short allen bolts as well as the 16 long
allen bolts installed in Step 1 & 2 with the allen wrench.
5 Remove the adhesive backer off of each rubber bumper
and attach to frame as illustrated.
B. Fit 4 glass tops into the shelves, making sure each shelf
is firmly supported by the rubber bumpers.
4 Attach the 2 wall brackets to the underside of the 2nd
shelf with 2 allen screws. Place frame in desired location
against the wall and mark the location of the holes in each
bracket. Insert 2 plastic wall anchors into the wall as
illustrated, and secure brackets to wall with 2 medium
screws.
A
x 8
OPTIONAL WALL MOUNTING
INSTRUCTIONS:
If you wish to secure the shelf to
the wall, note that the hardware provided is
for mounting to drywall only. Make sure to
use hardware appropriate for your wall type.
Drill hole in wall with
slightly smaller diameter
than plastic wall anchor
A
B
B
2 Attach right side frame to assembly with 8 long allen
bolts. Do not fully tighten bolts.
x 16
x 8