Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
BARCELONA 5-SHELF ETAGERE
Page 2 of 2
Made in China - r05
CLEANING AND CARE
Clean surfaces with a dry or damp
soft cloth. Do not use abrasive cleaners.
3 A. Insert 8 short allen bolts into the holes in the
underside of the top and bottom shelves.
B. Fully tighten 8 short allen bolts as well as the 20 long
allen bolts installed in Step 1 & 2 with the allen wrench.
5 Remove the adhesive backer off of each rubber bumper
and attach to frame as illustrated.
B. Fit 5 glass tops into the shelves, making sure each shelf
is firmly supported by the rubber bumpers.
Assembly is now complete.
4 Attach the 2 wall brackets to the underside of the
2nd shelf with 2 allen screws. Place frame in desired
location against the wall and mark the location of the
holes in each bracket. Insert 2 plastic wall anchors into
the wall as illustrated, and secure brackets to wall with 2
medium screws.
A
x 8
x 20
Drill hole in wall with
slightly smaller diameter
than plastic wall anchor
A
B
B
2 Attach right side frame to assembly with 10 long allen
bolts. Do not fully tighten bolts.
OPTIONAL WALL MOUNTING
INSTRUCTIONS:
If you wish to secure the shelf to
the wall, note that the hardware provided is
for mounting to drywall only. Make sure to
use hardware appropriate for your wall type.
x 10