Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Allen wrench (included)

1 Place top frame upside down. Loosely attach each leg

by inserting 1 allen head bolt through the top frame and into

the corresponding hole in the top of each leg. Do not fully

tighten.

Thank you for purchasing the Barcelona Console

Table. This page lists all the contents included in

the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

COMPONENTS

1 - glass top

1 - top frame

1 - shelf

4- legs

BARCELONA CONSOLE TABLE

Page 1 of 2

Made in China

4 - levellers

4 - rubber bumpers

8 - allen head bolts

Missing hardware? Please call 800.606.6387 for replacements.

PAGE 1
BARCELONA CONSOLE TABLE HARDWARE 8 - allen head bolts 4 - rubber bumpers 4 - levellers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Barcelona Console Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
BARCELONA CONSOLE TABLE 2 Fit shelf into position, aligning holes in shelf corners with holes on legs. Secure with 1 allen head bolt per leg and fully tighten each with allen wrench. 3 Insert 1 leveller into threaded hole on the bottom of each leg. x4 5 Remove the adhesive backer from 4 rubber bumpers and place over each exposed bolt head in the top frame. Fit glass top into position. Assembly is now complete. 4 With the assistance of another adult, place table assembly in an upright position.