Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
BALCONY WARDROBE BASE and TOP
Made in Vietnam - r06
Page 3 of 3
5 A. Insert 8 shelf pins at desired shelf height. Angle 2
adjustable shelves into position and place on pins.
B. Attach 1 pull to each door with 1 long screw and 1
washer per pull. Assembly is now complete.
6 With the assistance of another adult, place Wardrobe Top
onto assembled Wardrobe Base. Align back edges as
shown and attach 2 mending plates with 4 wood screws
per plate.
x 8
x 2
CLEANING AND CARE
A
B
WARDROBE ASSEMBLY
OPTIONAL WALL ATTACHMENT
These instructions are for drywall mounting only. For safe installation it is essential to use hardware appropriate for your wall
type. Mount to wood wall studs whenever possible. If you are unsure of what type of fasteners to use, consult your local
hardware store or a qualified professional. This product is only deterrent, it is not a substitute for proper adult supervision.
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish
as the wood is finished with a protective clear lacquer.
Factory installed
bracket
A. Locate the 2 factory installed brackets on the
back edge of the top panel. With the assistance of
another adult place unit in desired location against
the wall. Mark the location of the 2 brackets on the
wall. Move the unit out of the workspace.
B. Position 2 metal brackets on the corresponding
wall marks and mark the 2 holes on each bracket.
C. Drill 1 hole at each mark, slightly smaller in
diameter than the wall anchor. Note: Do not use
wall anchors if mounting directly into a wall stud.
D. Insert 1 wall anchor into each hole, gently
tapping with hammer if necessary until anchor is
flush with wall surface.
E. Insert 2 screws through each metal bracket and
into wall anchors. Secure with a screwdriver.
F. Place unit back into position against the wall and
thread the wall strap through each pair of metal
brackets and pull until tight.
x 2
Holes
in wall