Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Allen wrench (included)

1 Fit the upper leg frame onto the lower leg frame,

aligning holes at the center of each crossbar. Loosely attach

frames with 1 bolt at the center. Do not fully tighten the bolt.

Thank you for purchasing the Balcony 42" Dining

Table. This page lists all the contents included in

the box. Please take time to identify the hardware

as well as the individual components of this product.

As you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

NOTE: 2 people are required to assembly this

product.

COMPONENTS

1 - glass top

1 - upper

leg frame

1 - lower

leg frame

1 - top ring

BALCONY 42" DINING TABLE

Page 1 of 2

Made in China - r03

Missing hardware? Please call 800.606.6387 for

replacements.

5 - bolts

4 - glass bumpers

PAGE 1
BALCONY 42" DINING TABLE HARDWARE 5 - bolts 4 - glass bumpers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Balcony 42" Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. NOTE: 2 people are required to assembly this product.
PAGE 2
BALCONY 42" DINING TABLE B A 2 With the assistance of another adult, turn leg assembly upside down and place on a padded surface. Slide top ring over leg assembly and align holes in each leg with corresponding holes in top ring. Loosely attach each leg with 1 bolt. Make any necessary adjustments to align the top tubes with the leg frames and fully tighten all bolts with the allen wrench. 3 Turn leg assembly right side up. A. Attach 1 glass bumper to the top of each leg. B.