Assembly Instruction

Made in Vietnam - r03 Page 2 of 3
3 With the assistance of another adult, position unit upside
down onto a clean, padded surface. Fit threaded bolt of each
leg into corresponding holes of pedestal. Secure each leg with
2 hex nuts, 2 large spring washers and 1 bracket as shown,
using a hex wrench.
AVALON ROUND EXTENSION DINING TABLE
4 With the assistance of another adult, position tabletop
face down as shown. Attach leg assembly to tabletop with
8 bolts, 8 small spring washers, and 8 small flat washers,
using a phillips head screwdriver. Carefully position unit
upright.
Assembly is now complete.
5 A) Locate 4 locking clasps underneath tabletop
assembly.
B) To unlatch, turn each handle 90º counter-clockwise. This
will release the tabletop sections.
leg
hex nut
large spring washer
leg
assembly
bolt
small spring
washer
small flat
washer
90º
VIEW FROM UNDERNEATH
TABLETOP
• Turn clockwise
to lock
• Turn counter-
clockwise to unlock
NOTE: Do not
over tighten
the hex nuts
bracket
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
tabletop
INSTRUCTIONS
TO RELEASE
LEAF EXTENSION
2 Secure each threaded stud with 1 hex nut, 1 large
spring washer and 1 large flat washer as shown.
Secure, but do not over tighten, hex nuts with a hex
wrench.
A
B
hex nut
large spring
washer
large flat
washer