Assembly Instruction
Made in Thailand - r05 Page 2 of 2
2 With the assistance of another adult, position unit
upside down onto a clean, padded surface as shown. Fit
threaded bolt of each leg into corresponding holes of
pedestal. Secure each leg with 1 hex nut, 1 large spring
washer and 1 large flat washer, using a hex wrench.
AVALON ROUND EXTENSION DINING TABLE
3 With the assistance of another adult, position tabletop face
down as shown. Attach leg assembly to tabletop with 8
tabletop bolts, 8 small spring washers, and 8 small flat washers,
using a small allen wrench. Carefully position unit upright.
Assembly is now complete.
1 A) Locate 4 locking clasps underneath tabletop
assembly.
B) To unlatch, turn each handle 90º counter-clockwise.
This will release the tabletop sections.
2 With the assistance of another adult, slide the tabletop
sections apart. Carefully remove leaf and set aside. Close
tabletop sections and relatch locking clasps.
Assembly is now complete.
leg
hex nut
large spring washer
large flat washer
leg
assembly
tabletop
bolt
small spring
washer
small flat
washer
VIEW FROM UNDERNEATH
TABLETOP
• Turn clockwise
to lock
• Turn counter-
clockwise to unlock
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
tabletop
INSTRUCTIONS
TO RELEASE
LEAF EXTENSION
90º