Assembly Instruction

Made in Thailand - r02 Page 2 of 2
3 With the assistance of another adult, position unit
upside down onto a clean, padded surface as shown. Fit
threaded bolt of each leg into corresponding holes of
pedestal. Secure each leg with 2 hex nuts, 2 spring
washers and 2 flat washers, using a hex wrench.
AVALON 36” ROUND DINING TABLE
4 With the assistance of another adult, position
tabletop face down as shown. Attach leg assembly to
tabletop with 8 tabletop bolts, 8 spring washers, and
8 flat washers, using a large allen wrench. Carefully
position unit upright. Assembly is now complete.
leg
hex nut
spring washer
flat washer
tabletop
bolt
spring washer
flat washer
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
bottom
mounting
plate
pedestal
wood dowel
A
B
NOTE: Do not
over tighten
the bolts
B
2 A) Insert 2 wood dowels into pedestal as shown.
B) Fit dowels of pedestal into corresponding holes of
bottom mounting plate as shown. Attach bottom
mounting plate with 4 plate bolts, 4 spring washers
and 4 flat washers as shown. Secure, but do not over
tighten, bolts with a small allen wrench.
plate bolt
large spring
washer
tabletop
leg assembly
large flat
washer