Assembly Instruction

Made in Thailand - r05 Page 2 of 2
3 With the assistance of another adult, position unit
upside down onto a clean, padded surface as shown. Fit
threaded bolt of each leg into corresponding holes of
pedestal. Secure each leg with 2 hex nuts, 2 small
spring washers and 2 small flat washers, using a hex
wrench.
AVALON 36” ROUND DINING TABLE
4 With the assistance of another adult, position tabletop
face down as shown. Attach leg assembly to tabletop
with 8 tabletop bolts (4 previously pre-installed), 8 large
spring washers (4 previously pre-installed), and 8 large
flat washers (4 previously pre-installed), using an allen
wrench. Carefully position unit upright. Assembly is now
complete.
leg
hex nut
spring washer
flat washer
tabletop
bolt
large spring washer
large flat washer
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish on
the base as the bse unit is finished with a protective clear
lacquer. It is recommended to use coasters to protect
surface from heat and water.
bottom
mounting
plate
pedestal
wood dowel
A
B
NOTE: Do not
over tighten
the bolts
B
2 A) Insert 2 wood dowels into pedestal as shown.
B) Fit dowels of pedestal into corresponding holes of
bottom mounting plate as shown. Attach bottom
mounting plate with 4 plate bolts, 4 large spring
washers and 4 large flat washers as shown. Secure,
but do not over tighten, bolts with an allen wrench.
plate bolt
large spring
washer
tabletop
leg assembly
large flat
washer