Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r05 Page 1 of 2

Thank you for purchasing the Atrium Square Dining

Table. This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ATRIUM SQUARE DINING TABLE

Missing hardware?

Please call 800.606.6387 for replacements.

1 - tabletop

allen wrench (included)

4 - legs

4 - glass tiles

(sold separately)

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

8 - bolts

NOTE: Do not over

tighten the bolts

leg

tabletop

1 - tabletop ring

1 - tabletop cap

1 With the assistance of another adult, place tabletop

upside down onto a clean, padded surface. Attach 4 legs

to tabletop with 2 bolts per leg as shown. Secure, but do

not over tighten, bolts using an allen wrench.

PAGE 1
ATRIUM SQUARE DINING TABLE HARDWARE 1 - tabletop ring 1 - tabletop cap 8 - bolts Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED allen wrench (included) COMPONENTS Thank you for purchasing the Atrium Square Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ALTRIUM SQUARE DINING TABLE A glass tile (sold separately) B tabletop cap tabletop ring 2 A) With the assistance of another adult, position table upright. Fit 4 glass tiles (sold separately) into tabletop as shown. Make sure each tile is securely supported by pre-installed bumpers. B) Insert tabletop ring and tabletop cap into center hole of assembled unit as shown. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.