Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
3 Verify bottom flanges face each other. Using a phillips
head screwdriver, attach top shelf with 4 large screws by
passing screws through flange and into shelf's pre-drilled
holes. Secure all screws but do not over-tighten.
BOTTOM
5 Using 1 medium screw, attach the long leg of bracket
to the bottom of the 3rd shelf. Make sure the face of short
leg is flush with shelf edge.
Make sure longer leg of
bracket is attached to shelf
Top Shelf
(underside)
4 Attach 2nd, 3rd, 4th and bottom shelves using same
method of assembly as Step 3. Securely fasten all screws
but do not overtighten.
2 Insert tube caps into ends of both side rails.
Face of bracket should
be flush with shelf edge
x 4
x 2
ASPECT LEANING BOOKSHELF
Page 2 of 3
Made in China