Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Aspect Leaning Shelf

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

Flat head screwdriver

Electric drill & 5/8" drill bit

(for drywall installation) &

3/16" drill bit (for masonry)

Hammer

1 Lay left and right side rails on a flat surface with

flanges facing each other, oriented as shown. Note

the location of the holes on the flanges to determine

the orientation of the rails.

20 - large screws

1 - small screw

1 - medium screw

1 - wall anchor

1 - toggle bolt

1 - bracket

Thank you for purchasing the Aspect Bookcase.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

COMPONENTS

2 - side rails

(1 left, 1 right)

1 - top shelf

1 - 2nd shelf

1 - 3rd shelf

1 - 4th shelf

1 - bottom shelf

Bottom

(flange is

closest

to end)

Top

RIGHT RAIL

LEFT RAIL

ASPECT LEANING BOOKSHELF

Page 1 of 3

Made in China

4 - tube caps

Back

Front

Back

Front

Summary of content (3 pages)

PAGE 1
ASPECT LEANING BOOKSHELF HARDWARE 1 - small screw 1 - wall anchor 1 - medium screw 1 - toggle bolt 20 - large screws 1 - bracket 4 - tube caps TOOLS REQUIRED Phillips head screwdriver Thank you for purchasing the Aspect Bookcase. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ASPECT LEANING BOOKSHELF x2 x4 Top Shelf (underside) BOTTOM 2 Insert tube caps into ends of both side rails. 3 Verify bottom flanges face each other. Using a phillips head screwdriver, attach top shelf with 4 large screws by passing screws through flange and into shelf's pre-drilled holes. Secure all screws but do not over-tighten.
PAGE 3
ASPECT LEANING BOOKSHELF 6 With the assistance of another adult, position assembled unit against wall in desired location. Verify back edges of shelves all touch the wall as illustrated. Bracket attached to the 3rd shelf should also be touching the wall. Mark location of the bracket mounting hole on the wall. Move shelf out of workspace. NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified professional.