Assembly Instruction

HARDWARE
TOOLS REQUIRED
Made in Indonesia R02 Page 1 of 2
Thank you for purchasing the Ascend Wide Stacking
Shelves. This page lists all the contents included in the
box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely stack and secure
these units.
ASCEND WIDE STACKING SHELVES
Missing hardware? Please call 800.606.6387 for replacements.
2 - long
screws
2- mending
plates
4 - strap
brackets
2 - drywall anchors 2 - wall straps
10 - short
screws
Phillips Head Screwdriver
Drill with 1/4” diameter drill bit
Hammer
Customer Service 800.967.6696 | www.crateandbarrel.com
1 With the assistance of another adult, stack shelving units as shown, with pilot holes on each shelf at the back. Note: Do
not stack over 5 units high.
Align 1 mending plate with each set of pilot holes and attach with 4 short screws per plate. Secure, but do not over tighten
each screw with a phillips head screwdriver.

Summary of content (2 pages)