Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
3 A. Determine wall mounting location. Please note that box shelf can be
mounted horizontally or vertically. Tape wall template into position making
sure both holes are level.
B. If attaching directly to a wall stud, do not use the wall anchors. Fasten
each screw directly into the stud.
C. Drill a 3/16"diameter hole at each end of the template where indicated.
D. Remove wall template and insert a phillips head screwdriver into the
wall anchor and insert into the holes while turning each anchor clockwise.
Fully tighten until the anchor is seated flush with the surface of the wall.
E. With a screwdriver, insert the screw into the hole of the anchor. Leave
3/16" of the screw protruding out from the surface of the wall.
WALL MOUNTING INSTRUCTIONS:
The wall mounting hardware included with this shelf
is intended for drywall installation only. Be sure to
use hardware appropriate for your wall type.
Whenever possible, fasten screws directly into a wall
stud.
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
ARCHETYPE SMALL BOX WALL SHELF
Page 2 of 2
Made in China - r04
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B
C
D
4 Carefully align keyhole hardware on back side of the
short panels with the protruding screws in the wall and fit
securely into place.
Installation is now complete.