Assembly Instruction

ARBOR LOVESEAT
HARDWARE
Made in Vietnam - r02
Page 1 of 1
8 - bolts
Missing hardware? Please call 800.606.6387 for
replacements.
Thank you for purchasing the Arbor Loveseat. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Treat with Crate
& Barrel's Hardwood Protector or allow the
finish to weather to a silvery gray.
TOOLS REQUIRED
Allen Wrench (included)
ASSEMBLY
Attach left and right side frames to
seat back and seat base with 4
bolts per side frame as shown.
NOTE: Make sure the arrow marked
on the bottom of the seat base is
assembled towards the front.Secure
bolts with an allen wrench.
Assembly is now complete.
COMPONENTS
2 - side frames
(1 left, 1 right)
1 - seat
back
1 - seat
base
Customer Service 800.967.6696 | www.crateandbarrel.com
NOTE: Make sure the arrow
marked on the bottom of
the seat base is assembled
towards the front.