Assembly Instruction

ARBOR LARGE BENCH

HARDWARE

Made in Vietnam - r02

Page 1 of 2

8 - large

bolts

Missing hardware?

Please call 800.606.6387 for replacements.

Thank you for purchasing the Arbor Large Bench. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

NOTE: Do not fully tighten

the bolts until all bolts are

installed.

TOOLS REQUIRED

allen wrench (included)

1 Fit notches of each crossbar into corresponding

holes of 2 leg frames as shown. Loosely attach each

leg with 1 large bolt. Do not fully tighten the bolts

until all bolts are installed.

COMPONENTS

Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com

4 - small

bolts

4 - medium

bolts

4 - crossbars

2 - leg frames

1 - seat

leg frame

crossbar

PAGE 1
ARBOR LARGE BENCH HARDWARE 8 - large bolts 4 - medium bolts 4 - small bolts Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Arbor Large Bench. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ARBOR LARGE BENCH IMPORTANT: During assembly, lift both sections of leg assembly to prevent damage as shown A leg assembly A B B seat 2 A) Fit notches of leg assembly into seat as shown. Loosely attach corner legs with 4 small bolts. B) Loosely attach center legs with 4 medium bolts. At this point, fully tighten all bolts with an allen wrench. Position unit upright. Assembly is now complete. NOTE: Do not fully tighten bolts until all bolts are installed.