Assembly Instruction

ARBOR BARSTOOL
HARDWARE
Made in Vietnam - r05
Page 1 of 1
8 - large
bolts
Missing hardware? Please call 800.606.6387 for
replacements.
Thank you for purchasing the Arbor Barstool. This page
lists all the contents included in the box. Please take
time to identify the hardware as well as the individual
components of this product. As you unpack and prepare
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Treat with Crate
& Barrel's Hardwood Protector or allow the
finish to weather to a silvery gray.
TOOLS REQUIRED
Allen Wrench (included)
ASSEMBLY
A. Attach left and right side frames to
seat back with 2 small bolts per side
frame as shown. Secure bolts with an allen
wrench.
B. Attach left and right side frames to
seat base and 2 crossbars with 4 large
bolts per side frame as shown. NOTE:
Make sure the marked arrow located on the
bottom of the seat base is assembled
towards the front. Secure bolts with an
allen wrench.
Assembly is now complete.
COMPONENTS
2 - side frames
(1 left, 1 right)
1 - seat
back
1 - seat
base
Customer Service 800.967.6696 | www.crateandbarrel.com
4 - small
bolts
2 - crossbars
A
B
NOTE: Make sure the marked
arrow located on the bottom of
the seat base is assembled
towards the front.
small
bolts
large
bolts