Assembly Instruction

ARBOR LARGE BENCH
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Treat with Crate
& Barrel's Hardwood Protector or allow the
finish to weather to a silvery gray.
Made in Vietnam - r02
Page 2 of 2
Customer Service 800.967.6696 | Latest instructions availabe at www.crateandbarrel.com
A
A
B
B
2 A) Fit notches of leg assembly into seat as shown.
Loosely attach corner legs with 4 small bolts.
B) Loosely attach center legs with 4 medium bolts.
At this point, fully tighten all bolts with an allen
wrench. Position unit upright.
Assembly is now complete.
seat
leg assembly
NOTE: Do not fully tighten
bolts until all bolts are
installed.
IMPORTANT: During assembly, lift
both sections of leg assembly to
prevent damage as shown