Assembly Instruction

Made in Bolivia - r07
Page 2 of 2
Customer Service 800.967.6696 | Latest instructions availalbe at www.crateandbarrel.com
ARBOR RECTANGULAR DINING TABLE
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. We recommend
the use of outdoor furniture covers during inclement
weather.
Treat with Crate and Barrel’s Roble Protector or
allow the finish to weather to a silver gray.
2
Using a hex wrench, remove pre-assembled 1
flat washer, 1 spring washer and 1 hex nut from
each leg. Fit threaded stud of each leg into
corresponding hole of tabletop as shown. Make
sure to fit each numbered leg into corresponding
number on table top
4
With the assistance of another adult, position unit
upright. If not using an umbrella, conceal hole
with the umbrella cap as shown.
Assembly is now complete.
3
Attach each leg with 1 flat washer, 1 spring washer
and 1 hex nut. Secure, but do not over tighten, hex
nuts with an hex wrench.
NOTE: Fit each numbered leg
into corresponding number
on table top