Assembly Instruction

ARBOR LOUNGE CHAIR
HARDWARE
Made in Vietnam R03
Page 1 of 1
4 - bolts
6x90 (A)
4 - bolts
6x50 (B)
Missing hardware? Please call 800.606.6387 for
replacements.
Thank you for purchasing the Arbor Lounge Chair. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this
product.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not
use abrasive cleaners. Treat with Crate & Barrel's
Hardwood Protector or allow the finish to weather to
a silvery gray.
TOOLS REQUIRED
Allen Wrench (included)
1 Loosely attach seat panel to left side
frame with 2 bolts (A). Do not fully
tigten the bolts.
2 Loosely attach back panel to left
side frame with 2 bolts (B).
3 Attach right side frame to assembled
unit. As illustrated, insert 2 bolts (A) into
seat panel, and 2 bolts (B) into back
panel.
At this point, fully tighten all bolts with
the Allen wrench.
Assembly is now complete.