Assembly Instruction

1 Place base upside-down onto
clean, padded surface as shown.
Insert 4 casters into the bottom of
each leg as shown.
Thank you for purchasing the Antenna Office Chair.
This page lists all the contents included in the box.
Please take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect
them from damage.
2 Position base upright and fit
seat back into base as shown.
3 Secure seat back to base with
1 bolt, using an allen wrench. Do
not over tighten the bolt.
Assembly is now complete.
ANTENNA OFFICE CHAIR
Page 1 of 1
Made in Taiwan - r04
COMPONENTS
HARDWARE
TOOLS REQUIRED
1 - seat back 1 - base
CLEANING AND CARE
ASSEMBLY
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
caster
seat
back
base
1 - bolt
allen wrench (included)
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Missing hardware? Please call 800.606.6387 for replacements.
4 - casters