Assembly Instruction

4 Carefully place 1 glass top onto each shelf. Make sure
each glass top is securely supported by each adhesive
pad.
Assembly is now complete.
glass top
ANTENNA BOOKCASE
Made in Taiwan - r03 Page 3 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
5 A) Carefully remove 1st glass top and set aside.
Remove 2 inside small bolts from 1st shelf and attach
brackets to 1st shelf. Reattach with 2 small bolts and
replace glass top.
B) Determine final location of unit. Mark position on the
wall and drill a hole in the wall stud. If the wall stud is not
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap each plastic anchor
until the flange of each anchor is flush with the wall. Attach
brackets to the wall by inserting 1 screw through each
bracket and into each plastic anchor in the wall.
Wall mounting assembly is now complete.
B
bracket
B
A
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
OPTIONAL WALL MOUNTING ASSEMBLY