Assembly Instruction

2 A) With the assistance of another adult, position
assembly upright. Loosely attach crossbar to assembled
unit with 2 large bolts as shown.
B) Insert 24 small bolts into shelves as shown. At this
point, fully tighten bolts with an allen wrench.
crossbar
ANTENNA BOOKCASE
Made in Taiwan - r03 Page 2 of 3
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
3 A) Attach 4 adjustable feet to assembled unit as shown.
B) Attach 4 adhesive pads to each shelf as shown.
adjustable
foot
adhesive
pad
B
B
A
B
B
A
A
1 A) Fit brackets of left front and back
legs into 5 shelves (in descending order)
as shown. Make sure holes on side of
each shelf corresponds with holes of left
front leg. Loosely attach each shelf with
1 medium bolt as shown with an allen
wrench. Do not fully tighten bolts until all
bolts are installed.
B) Repeat step 1A for right front and
back legs as shown.
right back
leg
NOTE: Do not fully
tighten the bolts until
all bolts are installed
left back
leg
left front
leg
right front
leg
B
A
1st shelf
2nd shelf
3rd shelf
4th shelf
5th shelf
A