Assembly Instruction

4 Insert 1 plastic tube cap onto bottom of each leg. If
necessary, gently tap into place with a hammer.
2 A. Attach base frame to assembly with 2 machine
screws per rail, using same method outlined in Step 1.
B. Place 4 wine racks into position, fitting open tubes of
shelf ends onto pins of side frame.
3 Insert 8 shelf pins into remaining side frame and fit into
position. Install side frame at a slight angle, fitting pins into
shelves one at a time. Secure with 8 machine screws.
5 A. With the assistance of another adult, lift assembled unit
into an upright position. Place wood top into position. Insert 4
wood screws and 4 washers through each metal tab on the
crossbars and secure with a phillips head screwdriver.
B. At this point, fully tighten all machine screws installed in
Steps 1 - 3 with the allen wrench. Assembly is now complete.
CARE & CLEANING
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
wood is finished with a protective clear lacquer.
A
B
Install at a slight angle,
inserting pins into shelves
one shelf at a time
ALTO WINE TABLE
Page 2 of 2
Made in China - r03
A
B
x 16