Assembly Instruction

HARDWARE

Thank you for purchasing the Alto Wine Table. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

COMPONENTS

TOOLS REQUIRED

Allen wrench (provided)

Phillips head screwdriver

ALTO WINE TABLE

Page 1 of 2

Made in China - r03

Missing hardware? Please call

800.606.6387 for replacements.

16 - machine screws

4 - wood screws

4 - flat washers

4 - tube caps

16 - shelf pins

1 - wood top

1 - top crossbar

2 - side frames

1 - glass rack

4 - wine racks

1 - base frame

1 A. Lay 1 side frame face down with the tube fittings

facing up, oriented as shown. Slide top crossbar and glass

rack over tube fittings as shown. Make sure holes in rails and

tube fittings are aligned and face towards the inside.

B. Loosely attach frames with 2 machine screws per rail. Do

not fully tighten the screws.

C. Insert 8 shelf pins into threaded holes in side frame and

secure with the allen wrench.

x 2

PAGE 1
ALTO WINE TABLE HARDWARE 4 - wood screws 16 - machine screws 16 - shelf pins 4 - tube caps Thank you for purchasing the Alto Wine Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ALTO WINE TABLE Install at a slight angle, inserting pins into shelves one shelf at a time A B 2 A. Attach base frame to assembly with 2 machine screws per rail, using same method outlined in Step 1. B. Place 4 wine racks into position, fitting open tubes of shelf ends onto pins of side frame. 3 Insert 8 shelf pins into remaining side frame and fit into position. Install side frame at a slight angle, fitting pins into shelves one at a time. Secure with 8 machine screws. A x 16 B 5 A.