Assembly Instruction

3 Using a phillips head screwdriver, remove pull from
inside of each door. Set hardware aside. At this point,
re-attach 1 pull to the front of each door with 1 pull bolt
as shown.
Assembly is now complete.
ALLEGRO SIDEBOARD
Made in China - r04
Page 2 of 2
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer.
2 A) With assistance of another adult, carefully
position unit upright. Insert 8 shelf pins at desired
shelf heights.
B) Place 2 adjustable shelves into assembled unit.
Make sure each shelf is securely supported by each
shelf pin.
adjustable
shelf
Make sure
notched corners
are assembled
as shown
pull
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
A
B
A
pull bolt