Assembly Instruction

12 - leg

bolts

12 - spring

washers

12 - flat

washers

1 - sideboard

assembly

(pulls pre-attached to

inside of each door)

4 - legs

Thank you for purchasing the Allegro Sideboard. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ALLEGRO SIDEBOARD

Made in China - r04

Page 1 of 2

Missing hardware? Please call 800.606.6387 for replacements.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

TOOLS REQUIRED

allen wrench (included)

phillips head screwdriver

HARDWARE

COMPONENTS

1 With assistance of another adult, carefully position

sideboard assembly upside down on a clean, padded

surface as shown. Attach 4 legs to sideboard assembly

with 3 leg bolts, 3 spring washers and 3 flat washers

per leg as shown. Secure, but do not over tighten bolts

with an allen wrench.

leg

sideboard

assembly

NOTE: Do not

over tighten the

bolts

8 - shelf

pins

2 - adjustable

shelves

PAGE 1
ALLEGRO SIDEBOARD HARDWARE 12 - leg bolts 12 - spring washers 8 - shelf pins 12 - flat washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Allegro Sideboard. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALLEGRO SIDEBOARD A pull bolt Make sure notched corners are assembled as shown pull A adjustable shelf B 2 A) With assistance of another adult, carefully position unit upright. Insert 8 shelf pins at desired shelf heights. B) Place 2 adjustable shelves into assembled unit. Make sure each shelf is securely supported by each shelf pin. 3 Using a phillips head screwdriver, remove pull from inside of each door. Set hardware aside.