Assembly Instruction

6 Loosely attach front legs to assembled unit with 2
bolts, 2 spring washers, and 2 flat washers per leg as
shown.
7 Attach crossbar assembly of assembled unit with
4 large screws as shown. Secure screws with a
screwdriver. At this point, fully tighten all bolts with
an allen wrench.
8 Align velcro of bottom cover back onto the
corners of assembled unit as shown. Press firmly to
secure. Assembly is now complete.
flat washer
8 With this assistance of another adult, carefully
position unit upright.
Assembly is now complete.
Made in China - r08
Page 3 of 3
ALLEGRO SETTEE
spring washer
bolts
bottom
cover
NOTE: Large screws are
secured at an angle
Customer Service 800.967.6696 | www.crateandbarrel.com
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Do not use furniture wax
or polish as the wood is finished with a protective
clear lacquer. Do not leave spills unattended.
Spot clean as necessary.
5 Fit 2 legs into assembled unit as shown.
leg