Assembly Instruction

1 Attach crossbars A and B with 1 small screw as
shown. Secure screw with a phillips head screwdriver.
ALLEGRO LOUNGE CHAIR
3 A) Insert 3 wood dowels into backrest as shown.
B) Fit dowels of backrest into corresponding holes of
seat. Loosely attach seat to backrest with 6 large
bolts, 6 spring washers, and 6 flat washers as shown.
bolt
spring washer
flat washer
A
A
B
B
4 Fit dowels of crossbar assembly into
corresponding holes of assembled unit as shown.
crossbar
assembly
4 Fit 2 legs into assembled unit as shown.
leg
Made in China - r10
Page 2 of 3
Customer Service 800.967.6696 | www.crateandbarrel.com
seat
backrest
NOTE: Bottom cover
is not shown for
assembly purposes
crossbar
B
crossbar
A
NOTE: Make sure
“FRONT” labeled
on each crossbar
is assembled to
the front of the unit
FRONT
FRONT
seat
2 The bottom cover is fixed to the front edge of the
seat as shown. Peel back corners of bottom cover to
assemble legs.
bottom
cover
NOTE: Bottom cover
is fixed to the front
edge of seat