Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Allegro Extension Dining Table

Made in China - r06 Page 2 of 2

ALLEGRO ROUND EXTENSION DINING TABLE

2 A) Insert 4 wood dowels into pedestal

assembly as shown. Fit dowels of pedestal

assembly into corresponding holes of tabletop.

B) Locate 4 locking clasps underneath tabletop,

turn each clasp counter-clockwise to unlock.

With the assistance of another adult, carefully pull

each end of tabletop to open. Secure, but do not

over tighten, tabletop with 4 tabletop bolts, 4

spring washers, and 4 flat washers, using an

allen wrench. At this point, close and secure

tabletop.

Assembly is now complete.

1 A) Locate 4 locking clasps underneath tabletop

assembly.

B) With the assistance of another adult, slide tabletop

sections apart. Place leaf into position, aligning aprons on

leaf and tabletop. Push both ends of tabletop together.

Re-latch locking clasps.

Leaf assembly is now complete.

pedestal

assembly

tabletop

bolt

spring

washer

flat

washer

90º

VIEW FROM UNDERNEATH

TABLETOP

• Turn clockwise

to lock

• Turn counter-

clockwise to unlock

mounting

plate

wood

dowels

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

CLEANING & CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. Do not use furniture wax or polish as

the unit is finished with a protective clear lacquer. It is

recommended to use coasters to protect surface from

heat and water.

INSTRUCTIONS

TO RELEASE

LEAF EXTENSION

tabletop