Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Allegro Dining Table

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r04 Page 1 of 2

Thank you for purchasing the Allegro Dining Table.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ALLEGRO DINING TABLE

Missing hardware?

Please call 800.606.6387 for replacements.

12 - flat

washers

1 - tabletop

1 - base 1 - mounting plate

2 - legs

(w/o grooves)

12 - spring

washers

8 - short

bolts

4 - long

bolts

allen wrench (included)

1 With the assistance of another adult, fit pre-attached

dowels of each leg into corresponding holes of base as

shown. Make sure legs with and without grooves are

oriented as shown. Secure base with 4 long bolts, 4

spring washers and 4 flat washers using an allen

wrench as shown. Do not over tighten bolts.

leg with

grooves

2 - legs

(with grooves)

long bolt

spring

washer

flat

washer

NOTE: Do not over

tighten bolts

NOTE: Make sure legs

with and without grooves

are oriented as shown

leg without

grooves

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (2 pages)

PAGE 1
ALLEGRO DINING TABLE HARDWARE 8 - short bolts 4 - long bolts 12 - flat washers 12 - spring washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Allegro Dining Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALLEGRO DINING TABLE short bolt spring washer short bolt flat washer spring washer flat washer 2 With the assistance of another adult, carefully turn assembled unit over and attach mounting plate with 4 short bolts, 4 spring washers and 4 flat washers using an allen wrench as shown. 4 With the assistance of another adult, place tabletop face down onto a clean, padded surface as shown.