Assembly Instruction

ManualsBrandsCrate & Barrel ManualsTablesCrate & Barrel Allegro Café Table

COMPONENTS

Made in China - r06 Page 1 of 2

Thank you for purchasing the Allegro Café Table. This

page lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or padded

area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ALLEGRO CAFÉ TABLE

HARDWARE

TOOLS REQUIRED

Missing hardware?

Please call 800.606.6387 for replacements.

16 - flat

washers

16 - spring

washers

12 - short

bolts

4 - long

bolts

allen wrench (included)

1 - tabletop

1 - base 1 - mounting plate

2 - legs

(w/o grooves)

2 - legs

(with grooves)

1 With the assistance of another adult, fit pre-attached dowels

of each leg into corresponding holes of base as shown. Make

sure legs with and without grooves are oriented as shown.

Secure base with 4 long bolts, 4 spring washers and 4 flat

washers using an allen wrench as shown. Do not over tighten

bolts.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

leg with

grooves

long bolt

spring

washer

flat

washer

NOTE: Do not over

tighten bolts

NOTE: Make sure legs

with and without grooves

are oriented as shown

leg without

grooves

Summary of content (2 pages)

PAGE 1
ALLEGRO CAFÉ TABLE HARDWARE 12 - short bolts 4 - long bolts 16 - flat washers 16 - spring washers Missing hardware? Please call 800.606.6387 for replacements. Thank you for purchasing the Allegro Café Table. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
ALLEGRO CAFÉ TABLE short bolt short bolt spring washer spring washer flat washer flat washer 3 With the assistance of another adult, carefully turn assembled unit over and attach mounting plate with 8short bolts, 8 spring washers and 8 flat washers using an allen wrench as shown. 4 With the assistance of another adult, place tabletop face down onto a clean, padded surface as shown.