Assembly Instruction

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in China - r07 Page 1 of 2

Thank you for purchasing the Alfresco Cart. This page

lists all the contents included in the box. Please take

time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ALFRESCO CART

Missing hardware?

Please call 800.606.6387

for replacements.

phillips head screwdriver

allen wrench ( included)

(We recommend the use of hand tools instead of power tools)

CLEANING AND CARE

Clean surfaces with a dry or damp soft cloth. Do not use

abrasive cleaners. It is recommended to use coasters to

protect surface from heat and water and to cover the cart if

left outdoors for the winter.

To remove small scratches, trays can be lightly sanded

with a 0000 extra fine steel wool or very fine sand paper.

Remember to always sand in the direction of the wood

grain.

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

8 - bolt

caps

4 - small bolts

(pre-installed)

8 - large

bolts

1 - small tray 1 - cup tray1 - large tray

4 - wheels

1 - back frame

1 - left frame 1 - right frame

1 - front frame

PAGE 1
ALFRESCO CART HARDWARE 8 - bolt caps 8 - large bolts 4 - small bolts Missing hardware? Please call 800.606.6387 for replacements. (pre-installed) TOOLS REQUIRED phillips head screwdriver allen wrench ( included) (We recommend the use of hand tools instead of power tools) CLEANING AND CARE Thank you for purchasing the Alfresco Cart. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ALFRESCO CART left side frame front frame right side frame NOTE: Do not over tighten the bolts NOTE: Make sure ledges of each side frame are aligned during assembly NOTE: Make sure handle is assembled towards lower ledge as shown back frame 1 Attach left and right side frames to back frame with 4 large bolts as shown. Secure, but do not over tighten, bolts with an allen wrench. At this point, cover exposed bolts with 4 bolt caps. 2 Attach front frame to side frames with 4 large bolts as shown.