Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

Thank you for purchasing the Alden Nightstand.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the contents

on a carpeted or padded area to protect them from

damage.

COMPONENTS

TOOLS REQUIRED

Allen wrench (included)

Phillips head screwdriver

ALDEN NIGHTSTAND

Page 1 of 3

Made in Thailand - r02

Missing hardware? Please call 800.606.6387 for replacements.

12 - flat head

screws

4 - pan head

screws

10 - bolts

2 - leg frames

(1 left, 1 right)

1 - top panel

1 - shelf

1 A. Fit dowels of back panel into corresponding holes

in left leg frame. Attach with 2 bolts and secure with the

allen wrench.

B. Fit dowels of shelf into corresponding holes in legs as

shown.

1 - pull screw 1 - drawer pull

1 - back panel

1 - drawer front

2 - drawer sides

(1 left, 1 right)

1 - drawer

back

1 - drawer

bottom

x 2

PAGE 1
ALDEN NIGHTSTAND HARDWARE 12 - flat head screws 4 - pan head screws 1 - pull screw Thank you for purchasing the Alden Nightstand. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. 10 - bolts 1 - drawer pull Missing hardware? Please call 800.606.6387 for replacements.
PAGE 2
ALDEN NIGHTSTAND A B 2 A. Fit right leg frame onto back panel and shelf, aligning dowels with corresponding holes. Attach back panel with 2 bolts and secure with the allen wrench. B. Fasten shelf to legs with 4 pan head screws as shown. Secure with a phillips head screwdriver. A B 3 Align holes in top panel with corresponding holes in leg frames and back panel. Attach with 6 bolts, securing each with the allen wrench. NOTE: Do not over tighten the screws. C A B 4 A.
PAGE 3
ALDEN NIGHTSTAND CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 6 With the assistance of another adult, turn assembly upright. Fit drawer glide hardware into corresponding glide hardware on the case interior. Applying even pressure to each side of the drawer front, firmly push drawer into case glides. Assembly is now complete.