Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN TWIN BED
Page 2 of 2
Made in Thailand - r04
x 2
2 Attach foot board to each side rail with 2 bolts, 2
split washers and 2 flat washers. Secure all bolts with
the allen wrench.
3 Place slat assembly onto support ledge on inside of
each rail, aligning holes in slats with holes in ledge. Secure
with 6 small screws, fully tightening each with a phillips
head screwdriver.
Assembly is now complete.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the wood is finished
with a protective clear lacquer.