Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALDEN STORAGE BENCH
Made in China R06
Page 2 of 2
3 Carefully slide top panel into groove provided on back
panel. Do not fasten top panel until both side panels are
attached.
2 Carefully attach assembled unit to back panel with 3
large bolts, 3 spring washers, and 3 large washers.
Fasten using Phillips head screwdriver.
x 3
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
x 8
5 With the assistance of another adult, place unit upright.
Open top panel and attach 2 top supports with 4 small
screws per support as shown.
Assembly is now complete.
x 2
4 A) Fit right and left side panels and bottom panel onto
wood dowels of assembled unit. Secure side panels with 8
large bolts, 8 spring washers and 8 small washers.
B) Flip assembly over. Secure bottom panel to assembly
with 4 large bolts, 4 spring washers and 4 large washers.
Secure all bolts with a Phillips head screwdriver.
x 4
A
B