Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALCOVE STORAGE CABINET
Made in China - r04
Page 3 of 4
8 A. Attach 2 drawer sides to drawer back with 2
medium wood screws on either side.
B. Fit drawer bottom into slot at bottom of drawer sides
and back.
C. Fit drawer front onto front of assembly and secure with 2
medium wood screws on each side.
D. Attach 2 knobs to drawer front with 2 knob screws.
6 Fit top panel onto the case assembly as shown, aligning
dowels with corresponding holes on the underside of the top.
Attach with 6 bolts, 6 split washers and 6 washers. Secure
with phillips head screwdriver.
7 Attach 1 knob to each door with 1 knob screw. Secure
with a phillips head screwdriver.
5 Turn assembly upright and insert 4 shelf pins at desired
shelf height. Insert shelf into the case at an angle, and fit
onto shelf pins.
x 6
x 4
NOTE:
Do not over
tighten screws.