Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Alcove Storage Cabinet

Customer Service 800-967-6696 | http://www.crateandbarrel.com

ALCOVE STORAGE CABINET

HARDWARE

TOOLS REQUIRED

Phillips head screwdriver

COMPONENTS

Made in China - r04

Page 1 of 4

2 - wood

dowels

18 - bolts

4 - knobs 4 - shelf

pins

Missing hardware? Please call 800.606.6387 for

replacements.

Thank you for purchasing the Alcove Storage Cabinet.

This page lists all the contents included in the box.

Please take time to identify the hardware as well as the

individual components of this product. As you unpack

and prepare for assembly, place the contents on a

carpeted or padded area to protect them from damage.

Note: 2 people are required to safely assemble this

product.

2 - side panels

(1 left, 1 right)

1 - top panel

2 - drawer rails

(1 left, 1 right)

8 - medium

wood screws

8 - large

wood screws

1 - back panel

4 - knob

screws

12 - short

wood screws

18 - split washers

18 - washers

1 - front panel

1 - drawer front 2 - drawer sides

(1 left, 1 right)

1 - drawer back 1 - drawer bottom

3 - shelves

Summary of content (4 pages)

PAGE 1
ALCOVE STORAGE CABINET HARDWARE 2 - wood dowels 8 - medium 12 - short wood screws wood screws 18 - bolts Thank you for purchasing the Alcove Storage Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ALCOVE STORAGE CABINET x2 A B 1 A. Attach 1 drawer rail to the inside of each side panel as shown with 4 long wood screws. Secure each screw with a phillips head screwdriver, but do not overtighten. B. Place front frame face down on a padded surface. Loosely attach 2 side panels with 3 bolts, 3 split washers and 3 washers per panel. Do not fully tighten bolts. x4 2 Fit 1 shelf into position as shown. Loosely attach with 4 short screws from below and secure with a screwdriver.
PAGE 3
ALCOVE STORAGE CABINET x6 5 Turn assembly upright and insert 4 shelf pins at desired shelf height. Insert shelf into the case at an angle, and fit onto shelf pins. 6 Fit top panel onto the case assembly as shown, aligning dowels with corresponding holes on the underside of the top. Attach with 6 bolts, 6 split washers and 6 washers. Secure with phillips head screwdriver. x4 7 Attach 1 knob to each door with 1 knob screw. Secure with a phillips head screwdriver. NOTE: Do not over tighten screws. 8 A.
PAGE 4
ALCOVE STORAGE CABINET x2 B CLEANING AND CARE A Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. 9 A. Insert drawer assembly into case, lining up slots in drawer sides with corresponding rails on the case interior. B. Insert 2 wood dowels at the back of the drawer box assembly to act as drawer stops. Assembly is now complete.