Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ALCOVE STORAGE BENCH
Made in China - r02
Page 2 of 3
5 Position case assembly as shown. Line up corresponding
holes and dowels with holes in the underside of top panel.
Secure with 6 bolts, 6 split washers and 6 washers. Fully
tighten each bolt with a phillips head screwdriver.
2 Fit bottom panel into position as shown. Secure with 4
wood screws and a phillips head screwdriver.
At this point fully tighten the bolts from Step 1 with a phillips
head screwdriver.
4 Secure back of bottom panel to case with 4 wood
screws and a phillips head screwdriver.
3 Align dowels in side panels with corresponding holes in
the back frame and fit into position. Secure with 2 bolts, 2
split washers and 2 washers per side panel.
x 4
x 4
x 4
x 6
NOTE:
Do not over tighten the screws.