Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
4 Insert 1 plastic tube cap onto bottom of each leg.
Secure into place by gently tapping with a hammer.
AIR WINE BAR TABLE
Page 2 of 2
Made in China
2 A. Attach bottom shelf to assembly with 2 machine
screws per rail, using same method outlined in Step 1.
B. Place shelves into positon, fitting open tubes of shelf ends
onto pins of side frame.
3 Insert 8 shelf pins into remaining side frame and fit into
position. Install side frame at a slight angle, fitting pins into
shelves one at a time. Secure with 8 machine screws.
5 With the assistance of another adult, lift assembled frame into
an upright position. Remove adhesive backer and attach 6
bumpons. Install glass top, making sure each shelf is solidly
supported by the bumpons. Assembly is now complete.
CARE & CLEANING
Clean as needed with a damp cloth.
A
B
Install at a slight angle,
inserting pins into shelves
one shelf at a time