Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com

HARDWARE

1 A. Lay 1 side frame face down with the tube fittings

facing up, oriented as shown. Slide top rear rail and top front

rail over tube fittings. Make sure holes in rails and tube fittings

are aligned and face towards the inside.

B. Secure frames with 2 machine screws per rail using the

included allen wrench.

C. Insert 8 shelf pins into threaded holes in side frame and

secure with the allen wrench.

16 - machine screws

6 - rubber bumpons

Thank you for purchasing the Air Wine Bar. This

page lists all the contents included in the box.

Please take time to identify the hardware as well as

the individual components of this product. As you

unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

COMPONENTS

2 - side frames

1 - top rear rail

1 - top front rail

1 - bottom shelf

4 - shelves

1 - glass top

x 2

AIR WINE BAR TABLE

Made in China

4 - tube caps

TOOLS REQUIRED

Allen Wrench (included)

Hammer

16 - shelf pins

Missing hardware? Please call 800.606.6387 for replacements.

PAGE 1
AIR WINE BAR TABLE HARDWARE 16 - machine screws 16 - shelf pins 6 - rubber bumpons 4 - tube caps Missing hardware? Please call 800.606.6387 for replacements. TOOLS REQUIRED Thank you for purchasing the Air Wine Bar. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
PAGE 2
AIR WINE BAR TABLE Install at a slight angle, inserting pins into shelves one shelf at a time A B 2 A. Attach bottom shelf to assembly with 2 machine screws per rail, using same method outlined in Step 1. B. Place shelves into positon, fitting open tubes of shelf ends onto pins of side frame. 3 Insert 8 shelf pins into remaining side frame and fit into position. Install side frame at a slight angle, fitting pins into shelves one at a time. Secure with 8 machine screws.