Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Add Maple CD Wall Shelf

HARDWARE

TOOLS REQUIRED

COMPONENTS

Made in Thailand R05 Page 1 of 4

Thank you for purchasing the Add CD Wall Shelf. This

page lists all the contents included in the box. Please

take time to identify the hardware as well as the individual

components of this product. As you unpack and prepare

for assembly, place the contents on a carpeted or

padded area to protect them from damage.

Note: 2 people are required to safely assemble this product.

ADD CD WALL SHELF

Missing hardware? Please call 800.606.6387 for replacements.

16 - plastic

dowels

3 - large

screws

3 - medium

screws

3 - small

screws

4 - end caps

1 - top horizontal

panel

1 - bottom horizontal

panel

1 - back

panel

2 - vertical

panels

2 - cleats

(1 - shelf, 1 - wall)

3 - drywall

anchors

3 - wall

anchors

(others)

1 - glue

Phillips head screwdriver

rubber mallet

Customer Service 800.967.6696 | www.crateandbarrel.com

4 - connecting

bolts

Summary of content (4 pages)

PAGE 1
ADD CD WALL SHELF HARDWARE Thank you for purchasing the Add CD Wall Shelf. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. Note: 2 people are required to safely assemble this product.
PAGE 2
ADD CD WALL SHELF A NOTE: Wipe excess glue with a damp cloth. NOTE: Do not over tighten the bolts. B 1 A) Apply glue sparingly into holes provided on end caps. Insert 4 plastic dowels into each panel. Gently tap dowels with rubber mallet to secure. Wipe excess glue with a damp cloth. B) Insert 2 connecting bolts into vertical panels. Secure bolts with a Phillips head screwdriver, but do not over tighten. 2 Apply glue sparingly into holes provided on vertical panels.
PAGE 3
ADD CD WALL SHELF SIDE VIEW back panel shelf cleat screws 5 Attach shelf cleat to back panel of assembled unit as shown. Secure cleat with 3 small screws using a Phillips head screwdriver. 6 Carefully attach both assembled units together, by interlocking corresponding grooves located on vertical and horizontal panels. Gently tap assembled panels with rubber mallet to secure. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
PAGE 4
ADD CD WALL SHELF SIDE VIEW For drywall installation: screws wall cleat wall / drywall anchor 3 - medium 3 - drywall screws anchors For all other wall installation types: 3 - large screws 3 - wall anchors WALL MOUNTING INSTRUCTIONS screws wall cleat wall wall anchor There are 2 types of hardware included, 1 group for drywall installation and 1 group for all other hollow wall installation types. Be sure to use hardware appropriate for your wall type.