Assembly Instruction

ADD CD WALL SHELF

Made in Thailand R05 Page 2 of 4

1 A) Apply glue sparingly into holes provided on

end caps. Insert 4 plastic dowels into each panel.

Gently tap dowels with rubber mallet to secure.

Wipe excess glue with a damp cloth.

B) Insert 2 connecting bolts into vertical panels.

Secure bolts with a Phillips head screwdriver, but

do not over tighten.

2 Apply glue sparingly into holes provided on

vertical panels. Fit vertical panels into top cap and

bottom cap, by aligning holes with corresponding

plastic dowels. Gently tap assembled panels with

rubber mallet to secure.

3 Apply glue sparingly into holes provided on top

horizontal panel and bottom horizontal panel. Fit

side caps into top horizontal panel and bottom

horizontal panel. Gently tap assembled panels with

rubber mallet to secure.

4 A) Locate the assembled unit with 4 connecting

bolts on the vertical panels. Attach back panel to

assembled unit as shown, by aligning the

corresponding holes with connecting bolts.

B) Use a Phillips head screwdriver, turn built-in

cams located on back panel clockwise until it

securely engages each connecting bolt.

Customer Service 800.967.6696 | www.crateandbarrel.com

NOTE: Do not over

tighten the bolts.

NOTE: Wipe excess glue

with a damp cloth.