Assembly Instruction

Customer Service 800-967-6696 | http://www.crateandbarrel.com
ACADEMY TWIN BED
Made in China 2004
Page 2 of 2
4 Align pegs on underside of slat fittings with corresponding
holes on side rails and fit each into position.
Repeat until all slats are securely engaged in each fitting.
Assembly is now complete.
2 Align holes in side rails with corresponding holes in
footboard. Attach with 2 large screws, 2 small washers
and 2 large washers per side rail. Fully tighten with
allen wrench.
3 Fit 2 slat fittings on the end of each slat.
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners.
Large
Washer
Small
Washer
Large
Screw
x 13