Assembly Instruction

NOTE: Do not over

tighten the bolts

ABBOTT TWO-DOOR CABINET

Made in China - r06 Page 2 of 5

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

1 Insert 2 wood dowels into left and right side panels

as shown.

2 Fit dowels of left and right side panels into corre-

sponding holes of fixed shelf as shown. Secure each

side panel with 2 bolts, using a phillips head screw-

driver. Do not over tighten the screws.

3 A) Attach bottom panel with 6 large screws as

shown.

B) Insert 3 cams into bottom panel as shown. Make

sure arrows on each cam point toward nearest edge

with holes.

4 Place front frame face down onto a clean, padded

surface as shown, and insert 10 wood dowels and 3 cam

screws. Secure, but do not over tighten, cam screws

with a screwdriver.

NOTE: Do not over

tighten the cam screws

NOTE: Make sure arrows

on each cam point toward

nearest edge with holes