Assembly Instruction

ManualsBrandsCrate & Barrel ManualsStorage FurnitureCrate & Barrel Abbott Two-Door Cabinet

COMPONENTS

Made in China - r06 Page 1 of 5

Thank you for purchasing the Abbott Two-Door

Cabinet. This page lists all the contents included in

the box. Please take time to identify the hardware as

well as the individual components of this product. As

you unpack and prepare for assembly, place the

contents on a carpeted or padded area to protect

them from damage.

Note: 2 people are required to safely assemble this product.

ABBOTT TWO-DOOR CABINET

1 - back panel 2 - side panels

(1 left, 1 right)

1 - fixed shelf

1 - top panel 1 - adjustable shelf 1 - bottom panel1 - front frame

ASSEMBLY HARDWARE

MOUNTING HARDWARE

TOOLS REQUIRED

Missing hardware? Please call

800.606.6387 for replacements.

18 - wood

dowels

11 - bolts

3 - cams 18 - small

screws

phillips head screwdriver

(We recommend the use of hand tools instead power tools)

4 - shelf

pins

3 - cam

covers

16 - large

screws

3 - cam

screws

1 - wall

strap

1 - wall

screw

Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com

Summary of content (5 pages)

PAGE 1
ABBOTT TWO-DOOR CABINET ASSEMBLY HARDWARE Missing hardware? Please call 800.606.6387 for replacements. 18 - wood dowels 3 - cam screws 3 - cams 18 - small screws 11 - bolts 4 - shelf pins 16 - large screws 3 - cam covers MOUNTING HARDWARE Thank you for purchasing the Abbott Two-Door Cabinet. This page lists all the contents included in the box. Please take time to identify the hardware as well as the individual components of this product.
PAGE 2
ABBOTT TWO-DOOR CABINET A A B 5 A) With the assistance of another adult, carefully fit dowels of front frame into corresponding holes of assembled unit, and secure with 5 large screws per side panel as shown. B) With a screwdriver, turn each cam of bottom panel clockwise until it securely engages each cam screw. 6 Attach back panel to assembled unit with 14 small screws as shown, using a screwdriver. A B A B B A A B B 7 A) With the assistance of another adult, position unit upright as shown.
PAGE 3
ABBOTT TWO-DOOR CABINET NOTE: Do not over tighten the bolts 1 Insert 2 wood dowels into left and right side panels as shown. 2 Fit dowels of left and right side panels into corresponding holes of fixed shelf as shown. Secure each side panel with 2 bolts, using a phillips head screwdriver. Do not over tighten the screws. NOTE: Make sure arrows on each cam point toward nearest edge with holes B NOTE: Do not over tighten the cam screws A 3 A) Attach bottom panel with 6 large screws as shown.
PAGE 4
ABBOTT TWO-DOOR CABINET 9 Secure top of back panel to top panel with 4 small screws as shown. 10 Place adjustable shelf into assembled unit as shown. Make sure shelf is securely supported by each shelf pin. Assembly is now complete. CLEANING AND CARE Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as the wood is finished with a protective clear lacquer. Made in China - r06 Customer Service 800.967.
PAGE 5
ABBOTT TWO-DOOR CABINET NOTE: Insert screws 3/4"-1" from the edge of the strap WALL wall strap wall screw wall screw (NOTE: Additional screw not included. Please consult your local hardware store.) OPTIONAL WALL MOUNTING ASSEMBLY For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood studs whenever possible.